Factory Networks, CCTV and Fiber in Antalya OSB and Dosemealti

  • Döşemealtı
  • Antalya OSB
  • Yeniköy
  • Altınkale
  • Ilıca
  • Kırkgöz
  • Bıyıklı
  • Karaveliler

Network installation in Antalya OSB, the Organised Industrial Zone in Dosemealti, is where ÖZER Bilişim works with factories, production plants and warehouses: industrial networks, fiber between buildings, IP cameras, staff time and attendance (PDKS) and fire detection, with 24/7 technical support for the systems we commission. Besides the industrial zone, the district also has greenhouses, farms and new housing areas. This page focuses mainly on the industrial side, and is written for plant managers, owners and foreign investors who run production in the zone.

Network installation in Antalya OSB: what we find on site

A factory network runs under very different conditions from an office network. The production hall, dispatch bay, warehouse and admin building are often separate structures, and the distances between them go beyond what copper cable can handle. Standard Ethernet cable is reliable up to 100 metres; anything longer should run on fiber.

Tall metal racks and sheet metal roofs in warehouses reflect wireless signals and create dead spots in the aisles. If a forklift driver scanning barcodes loses connection there, dispatch waits. That is why we plan warehouse WiFi by measuring against the actual rack layout.

Dust, heat and vibration on the production floor are a separate issue. A cabinet placed in the hall with an unfiltered fan in the wrong spot overheats in summer, and switches restart at the worst moments. In an Antalya summer the temperature inside a closed sheet metal hall gets very high, so cabinets and devices have to be chosen with that in mind.

AreaTypical problemWhat we use
Production hallDust, heat, vibrationIndustrial DIN rail switches, IP-rated cabinets with filtered fans
Warehouse and rack aislesMetal racks blocking the signalAccess points placed by measurement along the aisles
Between buildingsDistances over 100 metres, lightning riskSingle-mode fiber backbone
Yard and car parkRain, sun, dustIP67 outdoor cameras and access points
Server roomPower cuts, overheatingUPS, air conditioning and temperature monitoring

Systems we install for factories and warehouses

Factory networks

We separate production, office, camera and guest traffic with VLANs and install a redundant core switch. Keeping the network with machines and PLCs apart from the office network makes it much harder for malware on one computer to reach production. We work with Cisco, Aruba, Ruijie and TP-Link Omada. For the line itself, we provide Metro Ethernet business internet as FACE TELEKOM's authorised dealer in Antalya.

Fiber cabling across the plot

We connect the buildings on the plot with a fiber backbone and hand it over with splice records and OTDR test reports. Inside each building we install Cat6/Cat6A cabling with labelled cabinets.

Perimeter security and plate recognition

We install night-vision IP cameras along the fence line, cameras that read number plates at the gate, and cameras covering the loading bays. We calculate the retention period you need and size the NVR disks to match. We work with Hikvision, Dahua, HiLook and Hanwha Wisenet; see our CCTV installation page.

Time and attendance (PDKS) and access control

In factories that run shifts, clock-in and clock-out records have to reach payroll correctly. We install card, face recognition or fingerprint terminals, turnstiles and door control, and make sure reports come out in the format your accounts team uses.

Fire detection

High-ceilinged halls, dusty production areas and warehouses each need the right type of detector. We design systems to Turkish regulations with an addressable panel, suitable detectors and manual call points.

Servers and backup

For the servers that run ERP, accounting and production tracking software, we prepare a backup and outage plan. Our solutions page lists the full range.

Greenhouses and new housing areas

For greenhouses and farms in Dosemealti we install outdoor cameras that cover wide open areas, and point-to-point wireless links to reach distant spots. In newly built complexes we handle common area cameras, entrance access control and apartment cabling. Villa owners in the district can also look at our villa and smart home page.

Where we work in Dosemealti

We provide on-site service across the whole district, including Antalya OSB, Yeniköy, Altınkale, Ilıca, Kırkgöz, Bıyıklı, Habibler and Karaveliler. The industrial zone is a short drive from our office in Muratpasa.

How we work without stopping production

  • Survey: we inspect the halls, cabinets and routes between buildings, and find out when production can be paused.
  • Design: the fiber route, cabinet positions, camera angles and equipment list are delivered in writing.
  • Installation: steps that need an outage are scheduled between shifts, at weekends or on planned maintenance days.
  • Handover: the network diagram, IP plan, fiber test reports and cabinet labels stay with you.
  • Support: we monitor the systems remotely and come on site when there is a fault.

To book a site survey for your plant in Antalya OSB, contact us or call +90 552 637 07 07.

Frequently Asked Questions

Our buildings in the OSB are far apart. Should we use a wireless bridge or fiber?
For permanent, high-traffic links we recommend fiber. Fiber does not conduct electricity, so it cannot carry lightning surges from one building to another. Where digging or ducting is not possible, a point-to-point wireless bridge can serve as a temporary or backup link.
Can you install plate recognition cameras at the factory gate?
Yes. We install cameras that read the plates of vehicles arriving at the gate and make the records searchable by date and time. If you want, the barrier can also open automatically for registered plates.
Can shift workers' clock-in records be passed to payroll?
Most time and attendance software exports clock-in and clock-out data in a format that Excel or payroll programs can read. During installation we set up the shifts to match your working pattern and test the report with your accounts team.
Does production have to stop during network and camera installation?
Most of the cabling and device mounting can be done while production continues. Steps that need a short outage, such as a network cutover, are scheduled between shifts, at weekends or on a planned maintenance day.
Do you install cameras for greenhouses and farms in Dosemealti?
Yes. For wide open areas we install night-vision outdoor cameras, and where running cable is difficult we use point-to-point wireless links. We decide the number and positions of the cameras by walking the site with you.

We use cookies to improve your experience and measure site traffic. Cookie Policy